As a homeowner, it’s important to have a basic understanding of your home’s electrical system. One component that you may need to replace at some point is the electric breaker. In this guide, we will walk you through the process of replacing an electric breaker step-by-step.
Tools you will need
Before getting started, make sure you have the following tools on hand:
- Screwdriver
- New electric breaker
- Safety goggles
- Gloves
Turn off the power
The first step in replacing an electric breaker is to turn off the power to the circuit. Locate your home’s main electrical panel and switch off the breaker that corresponds to the circuit you will be working on. To be safe, you may also want to shut off the main power to the house.
Remove the old breaker
Next, use a screwdriver to remove the screws that hold the cover of the electrical panel in place. Once the panel is open, locate the breaker that needs to be replaced. Carefully disconnect the wires from the old breaker and remove it from the panel.
Install the new breaker
Before installing the new breaker, make sure it is the correct size and type for your electrical panel. Attach the wires to the new breaker and carefully insert it into the panel. Secure the breaker in place by tightening the screws.
Test the circuit
Once the new breaker is installed, it’s important to test the circuit to ensure everything is working properly. Turn the power back on and check to see if the circuit is functioning as it should. If you notice any issues, turn off the power and double-check your work.
Congratulations, you have successfully replaced an electric breaker! Remember, safety should always be your top priority when working with electricity. If you are unsure about any step in the process, it’s best to contact a professional electrician for assistance.
We hope this step-by-step guide has been helpful to you. If you have any questions or would like to share your own experiences with replacing an electric breaker, please leave a comment below.